Baby Bath Dam can be used with newborn babies from the outset. No need to use a traditional baby bath. Designed to help busy eco‐conscious parents everywhere save water, energy, time and space.
The Bathwater Barrier creates a smaller space which gives both baby and parent reassurance by making it easier to keep baby safely within arms reach.
The BabyDam Bathwater Barrier benefits:
Designed to give your little one a safe secure space
Creating fun & cosy environment for your baby to enjoy bath time every time
The only baby bath that grows with your child
Easy to fit, lots of fun and eco friendly too.
Fitting your Baby dam wall
Step 1 Wet the suction cups thoroughly and ensure the bath is free from soap residue. Step 2 Hold BabyDam, as shown below, with your palms facing up and thumbs to the front of the faceplate. Line up the BabyDam in the bath above the position where you wish to locate it.
Step 3 Making sure your BabyDam is square within the bath, push down firmly with one hand on each of the curved handles.
Step 4 Push down firmly on each of the suction cups to ensure the cups are stuck to the bottom of the bath.
Step 5 Ensure that BabyDam is water tight by running your finger along the flexible seal to make sure it is flat.
Step 6 Remove the plug and fill to the minimum line for a newborn and insert the plug and fill to the maximum line for a toddler.
Step 7 Fill bath to the required depth. Never fill above the maximum fill marker on the BabyDam.
Babies/infants should be supervised by an adult at all times and never left unattended during bath time
Step 8 To remove BabyDam, release the suction cups one by one by pulling each pull tab upwards to break the seal.
PLEASE NOTE: WHEN CLEANING BABYDAM – NEVER USE ABRASIVES, ONLY CLEAN WITH WARM WATER AND TOWEL DRY AFTER USE.
Reviews
There are no reviews yet.